Spigen Glas.tR "EZ FIT" Tempered Glass Screen Protector for Tesla Model Y/3

Tempered glass with a revolutionary installation method - if you have been terrified of this aspect while using tempered glass, your problems have just been solved! The tempered glass has been secured with a mounting frame perfectly cut to the front of the tablet, thanks to which you can perfectly position it on the screen. The manufacturer has simplified the assembly method to such an extent that it is fully intuitive for every user.

Glas.TR EZ Fit is a 0.2 mm thick coating, which was hardened to 9H hardness in the production and hardening process. This makes it scratch-resistant even when in contact with sharp objects such as keys or a knife. The glass has been covered with an oleophobic and hydrophobic layer, which prevents fingerprints or other contaminants from leaving the screen. It is crystal clear and perfectly reflects the displayed colors. It also does not affect the touch sensitivity and has exceptional smoothness, making it a pleasure to move your finger across the screen. The glass is dedicated in particular to protect the screen against scratches and minimizes the risk of screen damage during an unexpected fall.

* Glass/Foil is cut only on the flat part of the display with a prominent structure, in accordance with and based on a die prepared by the manufacturer of a given device model. Only such a cut of the foil / glass will ensure full compatibility with our protective accessories.

** Due to the various milling of the edges of the displays, after installing the film / protective glass on the screen, a delicate air halo may appear around the screen. This is a natural situation and depends on the screen itself.

ASSEMBLY INSTRUCTIONS:
1) Start the assembly in the bathroom right after taking a bath - the steam will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the surface of the screen, and then use a dry cloth to polish it to a shine.
3) Put the frame with unsealed glass on the front part of the device.
4) Remove the frame with the protective film. Get rid of air bubbles by pressing the whole thing in circular motions for several dozen seconds. Do it so that the adhesive layer bonds to the screen as much as possible.

PRODUCT FEATURES:
- 100 Original
- Packed in the original packaging
- Exceptional ease of installation thanks to the mounting frame
- 9H hardness
- 2.5D milled edges pleasant to the touch
- Additional oleophobic layer
- Perfect transparency
- Does not affect the functionality of the touch
-