Hofi Szkło hybrydowe hofi hybrid glass apple watch 4/5/6/se (40mm) black

Can flexible mean better?

The small thickness of only 0.28mm and full screen coverage makes Hofi hybrid glass almost invisible.

Hardness at the level of 7H obtained thanks to the applied ceramic coatings.

These are the features of a hybrid of glass and foil, which means not only high resistance to pressure or scratches, but also full sensitivity to touch as well as perfect transparency and image saturation.

And finally, the most important, the greatest advantage of the product - it does not crack or crumble, unlike traditional tempered glasses!

Check how to install:

https://www.youtube.com/watch?v=j5WIzyY5AzA

INSTALLATION INSTRUCTIONS:

The assembly of this glass model looks different than in the case of traditional ordinary tempered glass on a thin adhesive layer, it is slightly more difficult due to a thicker adhesive layer.

In the initial phase of application, bubbles or air strips may remain trapped under the glass, which must be removed with repetitive movements to the edge, but the easiest way in this case is to peel off the coating to the place of the air bubble and stick it again, removing the air, e.g. with an ATM card.

It should also be remembered that due to the curvature, the curvature of the glass must coincide with the curvature of the screen.

If the glass does not stick to one of the sides, it means that it has been glued crookedly, in which case you will have to peel it off and retry the installation until successful.

Due to the polishing and milling of the screen, it requires several minutes of work in some cases, but the correct final effect is delightful.

PRODUCT FEATURES:

- 100% Original

- Packed in the original packaging

- 7H surface hardness

- Thickness 0.28mm

- Remains fully sensitive to touch

- Precise fit

- Dimensions: 36x30mm

SET CONTAINS:

1 x Hofi Hybrid Pro+ glass

1 x Installation kit